Start the function block editor – Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual User Manual
Page 63
Advertising
Publication 1734-UM015A-EN-E - November 2009
Configuring POINT I/O and ArmorPOINT I/O DeviceLogix modules using RSNetworx for DeviceNet 61
Start the Function Block
Editor
To start the Function Block editor, do the following.
1. Go to the property dialog box of the module.
2. Click the DeviceLogix tab, followed by Start Logic Editor.
On this tab, you can enter the Author’s name, revision, and description of the
logic program. These are generic text fields. They are saved in the DNT file
created by the RSNetworx for DeviceNet application.
Advertising