Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 15)

Publication 1734-UM015A-EN-E - November 2009
Introduction 13
Quick Start - Prepare the
Modules to work on
EtherNet/IP and ControlNet
Mount the Module
For POINT I/O, see Chapter 2 .
For ArmorPOINT I/O, see Chapter 3 .
Wire the Module
For POINT I/O, see Chapter 2 .
For ArmorPOINT I/O, see Chapter 3 .
Add Module to RSLogix 5000
See Chapter 5 .
Write the DeviceLogix Program in
RSNetworx for DeviceNet
See Chapter 7 .