Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual User Manual
Page 91
Advertising
Publication 1734-UM015A-EN-E - November 2009
Troubleshooting 89
Configuration or DeviceLogix program cannot be downloaded to
the module
A DeviceLogix program and most configurable parameters cannot be changed
while the DeviceLogix program is running or when an I/O connection is
active.
•
Inhibit the connection in RSLogix 5000 (if using EtherNet/IP and
ControlNet).
•
Disable logic in RSNetWorx for DeviceNet before downloading.
Advertising