Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 103)

Publication 1734-UM015A-EN-E - November 2009
Peer Data Maps 101
Peer X (byte 17, bit 1) Channel 1 calibration mode
Peer X (byte 17, bit 2) Channel 1 low alarm
Peer X (byte 17, bit 3) Channel 1 high alarm
Peer X (byte 17, bit 4) Channel 1 low low alarm
Peer X (byte 17, bit 5) Channel 1 high high alarm
Peer X (byte 17, bit 6) Channel 1 underrange
Peer X (byte 17, bit 7) Channel 1 overrange
Peer X (byte 18, bit 0) Channel 2 fault
Peer X (byte 18, bit 1) Channel 2 calibration mode
Peer X (byte 18, bit 2) Channel 2 low alarm
Peer X (byte 18, bit 3) Channel 2 high alarm
Peer X (byte 18, bit 4) Channel 2 low low alarm
Peer X (byte 18, bit 5) Channel 2 high high alarm
Peer X (byte 18, bit 6) Channel 2 underrange
Peer X (byte 18, bit 7) Channel 2 overrange
Peer X (byte 19, bit 0) Channel 3 fault
Peer X (byte 19, bit 1) Channel 3 calibration mode
Peer X (byte 19, bit 2) Channel 3 low alarm
Peer X (byte 19, bit 3) Channel 3 high alarm
Peer X (byte 19, bit 4) Channel 3 low low alarm
Peer X (byte 19, bit 5) Channel 3 high high alarm
Peer X (byte 19, bit 6) Channel 3 underrange
Peer X (byte 19, bit 7) Channel 3 overrange
Peer X (byte 20, bit 0) Channel 4 fault
Peer X (byte 20, bit 1) Channel 4 calibration mode
Peer X (byte 20, bit 2) Channel 4 low alarm
Peer X (byte 20, bit 3) Channel 4 high alarm
Peer X (byte 20, bit 4) Channel 4 low low alarm
Peer X (byte 20, bit 5) Channel 4 high high alarm
Peer X (byte 20, bit 6) Channel 4 underrange
Peer X (byte 20, bit 7) Channel 4 overrange
Peer X (byte 21, bit 0) Channel 5 fault
Peer X (byte 21, bit 1) Channel 5 calibration mode
Peer X (byte 21, bit 2) Channel 5 low alarm
Peer X (byte 21, bit 3) Channel 5 high alarm
Peer X (byte 21, bit 4) Channel 5 low low alarm
Input Tags for 8-Point Analog Input Modules (Continued)
Input Tag in DeviceLogix Editor Data