Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 14)

Publication 1734-UM015A-EN-E - November 2009
12 Introduction
Quick Start - Prepare the
Modules to work on
DeviceNet
Mount the Module
For POINT I/O, see Chapter 2 .
For ArmorPOINT I/O, see Chapter 3 .
Wire the Module
For POINT I/O, see Chapter 2 .
For ArmorPOINT I/O, see Chapter 3 .
Configure DeviceNet Network and
Scanner
See Chapter 4 .
Configure the Module using
RSNetWorx for DeviceNet
See Chapter 6 .
Write the DeviceLogix Program
See Chapter 7 .