Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 73)

Publication 1734-UM015A-EN-E - November 2009
DeviceLogix Capabilities 71
Digital Inputs to Function Blocks
When the Bit Input I/O tag connector is added to the DeviceLogix editor, the
following input options are available:
Hardware
Discrete Input 0 through Discrete Input 7 are the states of the eight I/O
points on the module.
Status
The following is a list of status bits that can be selected. Most will only be used
in a DeviceNet network:
• Explicit Msg Cnxn Exists
• Polled Cnxn Exists
• COS/Cyclic Cnxn Exists
• Polled Cnxn Fault
• COS/Cyclic Cnxn Fault
• Polled Cnxn Idle
• Network Fault
• Minor Module Fault
• Bit-Strobe Cnxn Exists
• Bit-Strobe Cnxn Fault
• Bit-Strobe Cnxn Idle