Metrohm 815 Robotic Soliprep - Manual (Page 100)

4.1 Installation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
92 ￭￭￭￭￭￭￭￭
815 Robotic Soliprep
￭ External position 1, Work position = 157 mm
4.1.5 Defining rack positions
Rack 6.2068.020
1 Switch over to the Rack tab and click on [Rack data] to open the
rack parameter settings.
2 Switch to the Lift positions tab.
3 Enter the value 45 mm as Shift position under Tower 1.
4 Enter the value 160 mm as Work position under Tower 2.
5 Enter the value 16 mm as Shift position under Tower 2.