12 setting up the rinsing tubing, Setting up the rinsing tubing – Metrohm 815 Robotic Soliprep User Manual
Page 35
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Robotic Titration Soliprep 2.815.1110
815 Robotic Soliprep
■■■■■■■■
27
2.1.12
Setting up the rinsing tubing
Tower 1
6.1805.060
6.1446.040
1
2
Install the tubing for rinsing as follows:
1 Seal one opening on the distributor of tower 1 with the 6.1446.040
screw nipple.
2 Connect three 6.1805.060 tubings (60 cm) to the remaining M6 con-
nectors of the distributor.
Tower 2
6.1805.060
6.1805.120
1
2
Install the tubing for rinsing as follows:
1 Connect the green inlet tubing (6.1805.120) of the rinsing station to
one of the four connectors on the tower 2 distributor.
Advertising