13 assembling and mounting the polytron® drive, Assembling and mounting the polytron, Drive – Metrohm 815 Robotic Soliprep User Manual
Page 36
Advertising
2.1 Installation
■■■■■■■■■■■■■■■■■■■■■■
28
■■■■■■■■
815 Robotic Soliprep
2 Connect three pieces of 6.1805.060 tubing (60 cm) to the tower 2
distributor.
Install the inlet tubings as follows:
1 Connect a 6.1812.000 PTFE tubing to the tower 1 valve. Connect the
other end of the tubing to a canister with rinsing liquid (e.g. water).
2 Connect a 6.1812.000 PTFE tubing to the tower 2 valve. Connect the
other end of the tubing to a canister with rinsing liquid (e.g. water).
1
2
6.1812.000
2.1.13
Assembling and mounting the Polytron
®
drive
Please consult the Polytron user manual for details how to mount the
aggregate to the Polytron PT 1300 D.
Advertising