Metrohm 815 Robotic Soliprep - Manual (Page 9)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
815 Robotic Soliprep
￭￭￭￭￭￭￭￭ 1
1 Introduction
1.1 Field of application
The 815 Robotic Soliprep systems are automation systems suitable for a
variety of uses. They have been designed exclusively for utilization in facto-
ries and laboratories and cover a wide range of applications. Soliprep sys-
tems can be used for automation purposes wherever a complex sample
preparation of solid substances is required, e.g. for pharmaceutical or
food analysis.
The Robotic Sample Processors, which have proven their worth for many
years, form the basis for a versatile system that has been expanded to
include possibilities for the dispersion, filtration and bottling of samples of
all sorts. The versatile concept can be expanded practically at will.
Thanks to the integration of high-performance communication interfaces
(USB, RS-232), they can be incorporated seamlessly into a variety of instru-
ment systems, and not only those manufactured by Metrohm. Operation
by the high-performance tiamo
™ software ensures not only user-friendly
operation and programming of automation sequences, but also allows
100% compliance the entire automation system with FDA (Food and Drug
Administration) regulations. This applies in particular with regard to regu-
lation 21 CFR Part 11, Electronic records and signatures.
The Soliprep systems are not suitable for clinical or biological applications.
1.2 Model versions
815 Robotic Titration Soliprep (2.815.1110)
￭ Dispersion and titration
The automation system for titration of solid samples. A workstation equip-
ped with a dispersion device is used to shred the sample. The dispersion
aggregate is cleaned in a special rinsing station. The second workstation is
designed as a complete titration workplace with rinsing and aspirating
equipment.
815 Robotic Flexible Soliprep (2.815.2110)
￭ Dispersion, filtration and bottling
The universal automation system for sample preparation in chromatogra-
phy. A workstation equipped with a dispersion device is used to shred the
sample. The dispersion aggregate is cleaned in a special rinsing station.
The second workstation is equipped for sample transfer with a universal
robotic arm with a Luer adapter. It is used for picking up syringe needles