14 mounting the rinsing tubings for the polytron, Mounting the rinsing tubings for the polytron – Metrohm 815 Robotic Soliprep User Manual
Page 37
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Robotic Titration Soliprep 2.815.1110
815 Robotic Soliprep
■■■■■■■■
29
Mounting the Polytron
1
2
Mount the Polytron as follows:
1 Insert the Polytron with the aggregate already mounted into the
robotic arm holder on tower 2 from above.
2 Readjust the position of the holder if necessary. Press down the fixing
lever of the holder to accomplish this.
2.1.14
Mounting the rinsing tubings for the Polytron
®
For rinsing the Polytron aggregate rinsing nozzles must be mounted on
the robotic arm. Proceed as follows:
1
2
2
2
1
1
3
6.2740.020
6.1805.060
6.1805.xxx
1 Replace the three stoppers on the Polytron robotic arm with
6.2740.020 rinsing nozzles.
Advertising