Metrohm 815 Robotic Soliprep - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Robotic Flexible Soliprep 2.815.2110
815 Robotic Soliprep
￭￭￭￭￭￭￭￭ 45
3.1.4 Configuring the towers
Various positions must be defined for lift 1 and lift 2 before process meth-
ods are created for the 815 Robotic Soliprep.
Tower 1
Configure the positions for tower 1:
1 Double-click on the instrument name 815_1 in the Devices win-
dow.
2 Click on the Tower 1 tab.
3 Enter the following settings:
￭ Swing position = 45 mm
￭ External position 1, Angle = 91.9°
￭ External position 1, Work position = 0 mm
￭ External position 2, Angle = 138.9°
￭ External position 2, Work position = 0 mm
Tower 2
Configure the positions for tower 2:
1 Click on the Tower 2 tab.
2 Enter the following settings:
￭ Swing position = 29 mm
￭ External position 1, Angle = 119.6°