Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 27)

▪▪▪▪▪▪▪ 25
SYSTEM Left Side Right Side Top Bottom Front Access
Basic Unit, Fan-
cooled 12”
(305mm)
18” (457mm) 18” (457mm) Flush Mount 48” (1220mm)
Vortec Cooled
12”
(305mm)
18” (457mm) 18” (457mm) Flush Mount 48” (1220mm)
Purged System,
Vortec Cooled 12”
(305mm)
18” (457mm) 18” (457mm) Flush Mount 48” (1220mm)
Purged System,
Air Conditioned 12”
(305mm)
18” (457mm) 18” (457mm) Flush Mount 48” (1220mm)
The mounting bolts must be 3/8” (10mm) in size. The environment may require stainless steel
mounting hardware due to industry or washdown requirements.
See section 5.4 for more specific information on lifting, handling and mounting the enclosure.
Probe Mounting Information:
Because probes come in various configurations, we have included drawings of the standard probe
designs in section 14, Appendix. Please note the following information about probes:
1. Probe designs shown are not necessarily the most current revision, due to printing deadlines
and other factors
2. Probe lengths and materials may be different from designs shown.
3. Setscrews, mounting dimensions and style are subject to change without notice.
Always request a current drawing (or verify specifications) before committing to mounting
dimensions.