Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 82)

80 ▪▪▪▪▪▪▪
The TSSZERO file is shown as a spectral plot. The
spectrum is a flat line at 0 AU.
Vision takes a reference using the fiber optic
probe. This spectrum is plotted (not shown here.)
When this message appears, click on “OK”.
Vision plots the TSSZERO.da file on screen.
Click on “OK”.
The correction file is plotted. Click “OK” to see
the final correction, overlaid onto the certified
TSSZERO spectrum. The two spectra should
overlay perfectly.
Click on “OK”.
When finished, the user may print the report.
Next, click on “Close Report” to finish.
10.3.5 Performance Test, Interactance Immersion