Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 93)

▪▪▪▪▪▪▪ 91
1. Select Performance Test from the
Diagnostics menu bar.
2. Select the channel to be used for the test.
In this case, we select “SAMPLE”. The end
of the Interactance Immersion probe
should be protected from stray light for
this test.
This tests the sample channel, and
provides a comprehensive test of
instrument performance.
Vision provides a split-screen display that details instrument performance. The lower right quadrant
shows tabulated data. Double-click to enlarge this screen to full size. When the test is complete, tabs
shows results.