Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 55)

▪▪▪▪▪▪▪ 53
13. A Data Collection Method (DCM)
selection box will appear. It is empty, so
no selection is available.
Click on the “New” button. A blank
DCM screen will be displayed.
An example of a DCM for this
instrument is shown on the next page.
14. When this DCM screen is shown, the Method is blank. Fill in the name with a meaningful
description. In this case we will name the method “Multiplexer 1Ch,” for the type of
instrument, and the sample channel used.
The Multiplexer has a Range of 800-2200nm. This is shown as selected. (Performance Test
range is 850-2100nm.)
Click on the “Mux Table” button.