Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 29)

▪▪▪▪▪▪▪ 27
This shows the Basic Unit with Vortec Cooler on the
right side.
The left side of the basic XDS
Process Analytics Instrument
shows the AC cable entrance
and RJ-45 connection,
indicated by arrows.
The XDS Process Analytics
Instrument is shipped with an
AC cable for testing and lab
use only, since many
instruments are operated in a
laboratory setting prior to
implementation on the process
line.
This AC cable must be
removed when the XDS
Process Analytics Instrument is
installed into the process
location. Wiring must follow
all local codes and
requirements, and most be run
through conduit.
The four plugs shown are for
the optional purge unit. On
the Basic XDS Process
Analytics Instrument, these
plugs remain in place as
shown.
AC Cable Entrance
RJ-45 Connection
Plugs