Metrohm NIRS XDS Process Analyzer – MicroBundle - Manual (Page 58)

56 ▪▪▪▪▪▪▪
22. This manual now describes various
software tests used to set up and test the
instrument. These tests must be run on
each sample channel marked as “Used” in
the Mux Table.
First select the channel. From the menu
bar, click on Acquire, then Select Channel.
Use the spinner to select the channel.
Start with Channel 1, and continue with
all “Used” channels.
10.1 Configure Options
Before tests are run, the Options must be set. This determines the methods of instrument set-up, and
affects how the data will be acquired.
1. Select Configure, Options from the menu
bar.