Metrohm NIRS XDS Process Analyzer – MicroBundle User Manual
Page 57
▪▪▪▪▪▪▪
55
17.
Click on the drop-down arrow next to Fiber Count. Supported types are Regular Bundle,
Micro Bundle, and Single Fiber. In this case select Micro Bundle.
Fiber Length depends on the fibers used in the system. The default is 0-3 Meters.
Scans defaults to 32 scans for a spectrum. This is normally not changed unless there is a
sampling reason that requires fewer or more scans.
18.
Now click on Channel 2. By default, Channels 2-9 are marked “Not Used”. If a channel is
used, be sure to click “Used” for that channel. Continue through all channels and verify the
correct setting.
Click on OK when finished. This returns the user to the DCM screen.
19.
Verify that the name is entered for the DCM. Click OK when finished.
20.
Click on the DCM method to highlight it,
then click on OK.
The instrument will connect.
21.
Once the instrument is successfully
connected, the amber “Communications”
LED will light.