Baseline Systems BaseStation 3200 - Manual (Page 17)

C h a p t e r 1 – G e t t i n g S t a r t e d
Page 15
Baseline 3200
X/XS-series Wall Mount Cabinets
The X and XS series Wall Mount cabinets are designed for outdoor or indoor wall or post
mounting. The cabinet features a center located key-hole main mounting screw assembly for
easy mounting, plus an additional center mounted hole as indicated in the diagram below. The X
& XS cabinets feature a ¼” air gap between the chassis and the mounting surface – this reduces
long term risk of water incursion or ice-dam buildup during inclement weather.
For security purposes, all mounting screw heads are protected behind the locked front cover,
making theft or vandalism materially more difficult.
Post or pole mounted units should use an appropriate wood or metal back-plate behind the
cabinet to insure best long term reliability and secure connections.
Keyhole Mount
#10 Pan Head Screw
Standoffs
Through-hole Mount
#10 Pan Head Screw
Side View Rear View
Connecting power & ground
Main AC Power connection is via a small built-in electrical box in the lower left of the enclosure.
Remove the screw on the right and the access panel to access the box. The box has a knock out
suitable for direct connection of a ½” conduit.
24VAC Transformer
Integrated Electrical Box (remove screw and panel to access)
110VAC Power & Ground Wires (240VAC for –INT units)
Wire nuts included.
Case Ground Lug
All installations should comply with local and national
electrical codes
Front View
Remote Connection Modules and Antennas
If installed, antennas for WiFi, Cell Modem, and Mesh Radio communication units mount through
the top mounted access port. BL Commander permanent receiver unit antennas mount on the
right access port (typically factory installed). To install a communications module in an existing
cabinet, consult the documentation that came with the communications module.