Baseline Systems BaseStation 3200 - Manual (Page 67)

C h a p t e r 5 – R e f e r e n c e
Page 65
Baseline 3200
The after the first valve biCoders have been
connected to the two-wire, a Search operation is
done to inventory each of the two-wire devices –
the valve biCoders will then be available in a list
to assign to their corresponding zone numbers. A
search operation is done by highlighting the first
menu item in the biCoder menu dial position and
pressing the ENTR key when search is selected
(see sample screen shot).
To assign a valve biCoder to a zone, use the + or –
keys to select the desired valve biCoder serial
number in the left selection box and then use the
NEXT/PREV keys to select the desired zone number. Once
both values have been selected, press the ENTR key to
make the assignment – the controller will power up the
two-wire and write the zone number to the valve biCoder,
and do a quick test of the solenoid. This solenoid status is
displayed in the last column. A summary of possible
status codes is listed to the right.
Master valves and pump start biCoders are also assigned
in this same dial position. Select MV1 to MV4 for the zone
number during the assignment process.

If there is a Flow + NOMV device, assign it first in the Flow Menu dial
position, then use remaining free MV locations for other master valves or
pumps.

To remove a two-wire device, you must physically diconnect it from the
two-wire and then perform a Search operation from the device specific
menu. This means a biSensor can only be removed by doing a search from
the biSensor menu, etc..
AUX
There are many functions and operations that are
accessed from the AUX dial position. Select the
desired function from the top level menu and
then press ENTR to display the specific screen you desire. The CLR key will return you to the top
level menu. Refer to the screen shot to the right for the different menu selection options.
OK – solenoid current is
acceptable
OP – solenoid is “open”
SC – solenoid is shorted
ER – unable to communicate
with biCoder