Baseline Systems BaseStation 3200 - Manual (Page 36)

C h a p t e r 1 – G e t t i n g S t a r t e d
Page 34
Baseline 3200
On-screen Reports
Follow the on-screen instructions to access reports from the Main Screen. By using the
NEXT/PREV keys, you can cycle through the report pages:
Main Screen
Program Reports
Moisture Reports
Flow Reports
Messages
Use the +/- keys while on any report page to see more reports or messages for each screen.
Messages can include status or warning messages, or serious controller alarms. Messages are
prioritized with the most serious messages automatically being shown first in the Messages
report screen.
BL Commander Handheld Remote Control
The BaseStation 3200 supports connection of a BL Commander Handheld Remote Control unit.
The BL Commander unit is a special version of the popular TRC Commander remote control unit
manufactured by Irrigation Remotes, and is compatible with all TRC Commander Accessories and
antennas.
BL Commander Permanent Mount Receiver Kits
A permanent receiver kit may be factory or field installed, and communicates digitally with the
BaseStation 3200 unit via a special internal port in the controller. With this option, controllers so
equipped can be controlled using a BL Commander handheld unit. The Receiver Kit has DIP
switches to set group and unit security codes.
BL Commander Mobile Receiver
A mobile receiver unit connects to the remote control port on the 3200 front panel and may be
connected to any compatible 3200 controller. The unit receives power from the controller.
BL Commander Universal Receiver Adapter
A Universal Receiver Adapter unit can be used to control older conventionally wired controllers
with the BL Commander handheld remote control unit. Up to 32 stations can be controlled with
the Universal Receiver Adapter. A special connection adapter is required, and must be
connected to each valve wire, common, and 24VAC power in order to turn zones on and off using
the unit.