Reference, Dial positions, Auto/run – Baseline Systems BaseStation 3200 User Manual

Page 57: 5reference, Dial positions auto/run

Advertising
background image

C h a p t e r 5 – R e f e r e n c e

Page 55

Baseline 3200

5

Reference

Section Contents

Dial Positions ......................................................................................................................55

Two-wire Devices ................................................................................................................73

BL-Commander (Handheld Radio Control) ..........................................................................77

BaseManager (Central Control Software) ...........................................................................76

Warranty .............................................................................................................................76

Dial Positions

Auto/Run

This is the dial position for normal watering
operation once the controller has been
programmed. There is a lot of information
displayed on this main screen about the current operation of the controller. Each of these fields
will be described:

Air Temp – if there is an air temperature sensor on the two-wire this will display the
current temperature.

Remote – this displays that status of either a BL-Commander handheld radio or a
BaseManager central control interface. The possible states are none, idle, and active.

Two-wire – this indicates the current in amps being supplied to the two-wire. This will
indicate off when the two-wire is powered down.

Flow – if there are one or more flow devices, this will
indicate the most recent flow reading. With multiple flow
devices, the display will rotate between each of them
every few seconds. Flow readings are read each minute.

Prog – this is an array of colored boxes, one for each
program. The color codes are common for programs and
valves and a color key has been included to the right.

MV – this set of boxes represents the state of each of the
four possible master valves

Zones – the array of zone status boxes show fifty zones at a
time, with the default being zones 1 to 50. To see the next

Advertising