Baseline Systems BaseStation 3200 - Manual (Page 39)

C h a p t e r 2 – B a s i c P r o g r a m m i n g
Page 37
Baseline 3200
minute increments from the top of the hour. If there is no start time, then the program is
considered to be OFF or disabled and no watering will be allowed on the zones of that program.
Start times are set from the Start Times dial position. To add a start time, highlight an empty
start time and use the + or – keys to set the time. A start time can be cleared by pressing the CLR
key.
Water Windows
Water windows are used to further select when
watering will be permitted or when it is not
allowed. Each hour of the day can be set to
allow watering, or to keep from watering. There
is a unique set of water window setting for each
program and water windows can be set on a
weekly basis (having the same water widow
settings for each day of the week), or they can
be set separately for each day of the week.
Water windows are programmed from the Start
Times dial position. Highlight the Set Water
Windows menu item and press ENTR. This will
show the programming screen as seen on the
right. The water windows can be set for either
Weekly (shown on the screen shot) or daily –
when moving from weekly to daily, the weekly
settings are copied to each day of the week.
Selecting daily water windows gives you hourly
control of watering for each day of the week,
and for each program. A white square will
restrict watering for that hour.

Use white squares to enforce watering restrictions.
Use the Set All To function to set all the windows ON or OFF and then select the individual
windows to change using the NEXT/PREV keys to select the window and the +/- keys to change
the setting.

When setting daily water windows, start by setting a basic profile in wekoly
mode, then change to daily mode to modify specific days (like a mow day).
Pressing the ENTR key will maintain the current selected field and advance
through the days of the
week. The CLR key will
return you to the Start
Times menu.
Day Intervals
Turning the dial to the Day Intervals position will
present the screens for setting the watering
days, as seen to the right. The default mode is a
seven day schedule and the individual days of
the week can be set to either yes or no (‘-‘). A