Baseline Systems BaseStation 3200 - Manual (Page 70)

C h a p t e r 5 – R e f e r e n c e
Page 68
Baseline 3200
AUX – Budget
Program watering budgets are included only for
completeness and are not recommended for
use. This screen allows the water times of all
zones on each of the twenty programs to be
adjusted up and down, between 25% and 200%
of the zone water time programmed from the
zone run times dial position.
A better watering strategy is to water deep (at
least ½” of water) and then water less often –
see the discussion on Historical ET Calendar
watering on page 38.
AUX – System
This menu provides two functions: changing the controller serial number and then a set of
system functions that should only be done under direction of Baseline support.
The temperature in the lower right corner is the
internal temperature of the controller.

Changing the controller
serial number will keep
you from doing a restore
from a previous backup
operation(if the controller
had a different serial
number).
Self-Test
This dial position provides a set of diagnostic and
self-test operations that are helpful to verify
correct operation and to help diagnose problems
when they arise.
There are four functions, the first two of which are sub-menus and will open screens with
additional information. Highlight the decired function and press ENTR to open the next screen,
or to execture the function (see below for more information).