P-series pedestals cabinets – Baseline Systems BaseStation 3200 User Manual
Page 18
C h a p t e r 1 – G e t t i n g S t a r t e d
Page 16
Baseline 3200
P-series Pedestals Cabinets
The P-series Pedestal units are designed to be pad-mounted, and come with a concrete template
for locating all mounting bolts, AC power and two-wire and/or valve wire conduits.
Locking Top Cover
Front Panel
Fan Assembly
Control Board (R-series shows)
AC surge protection
24VAC Transformer
Keyed Power Switch
Accessory Outlet (GFIC)
AC Power Junction Box
Mounting Bolts
Chassis Ground Lug
Grade Level
Cement Pad
Power Conduit
Valve & Two-Wire Conduit
Mounting pedestal to concrete platform
All P-series Pedestal units are shipped with a metal form to locate mounting bolts and conduits.
The concrete pad should be installed to Baseline specifications with proper slope for drainage.
Consult the Documentation Library on the Baseline web site a
for CAD details and additional instructions.
Remote Connection Modules and Antennas
If installed, antennas for WiFi, Cell Modem, and Mesh Radio communication units mount through
the access port on the left side of the pedestal, and include a stainless steel mounting body to
protect antenna cabling and raise antennas above the top of the pedestal for best signal
strength. Consult the Documentation Library on the Baseline web site at
or CAD details, communications options, and internal
locations for communications modules.
If equipped with a permanent mounted BL Commander handheld remote control receiver kit, the
receiver antenna will be mounted on the upper right side of the Pedestal enclosure.