Baseline Systems BaseStation 3200 - Manual (Page 69)

C h a p t e r 5 – R e f e r e n c e
Page 67
Baseline 3200
AUX – USB Data
The BaseStation 3200 has a USB port that is used
for data and program information. As can be
seen on the sample screen to the right, there are
three basic operations. These functions work
with a standard, USB Flash memory device (it will
not work with multi-function USB memory
devices like MP3 players).

Backup – highlighting this menu item
and pressing ENTR will write a copy
of the current controller program to
the USB device. This will be saved in
a folder that is the same as the serial
number of the controller (such as 3K0001). You should do a backup of your program
once you have it entered and stable.

Restore – this function will replace the controller program with the copy from the USB
Flash drive. A restore can only be done after a Backup operation copies the program
to the flash drive.

Export – this function will copy all of the internal log files to the USB flash drive. There
may to up to two years of files kept in the 3200 and all of these files will be copied.
The 3200 keeps daily files in monthly folders. These files are written to the USB Flash
drive in the controller serial number folder, in a sub-folder called Export. The
controller logs all programming changes, run times, moisture levels, and other
internal information in these files. These files may be requested by Baseline service
engineers.
AUX – Clear All
This function will clear or erase all programming
information in the controller. This is best used as
directed by Baseline support, and should never
be done with having a current Backup of the
programming.
Use the CLR key to exit this screen without
clearing all progrmming in the controller.
AUX – Valves
This function should only be used as directed by
Baseline support. This provides a way to change
the drive characteristics of the valve biCoders to
widen support to some non-standard solenoids.
Call Baseline support before attempting this,
866-294-5847.