Baseline Systems BaseStation 3200 - Manual (Page 65)

C h a p t e r 5 – R e f e r e n c e
Page 63
Baseline 3200
Date/Time
The date and time should be set when the
controller is installed, and when it is powered
back up after being shut down for an extended
period of time. The real-time clock circuit is maintained for several days during a power outage,
but will lose track of time after a week or more.
Set the date by using NEXT/PREV to select the date field and then adjust the field value using the
+ and – keys. When the desired date has been set, press the ENTR key, or just turn the dial to a
new location to write the new date and time into the real-time clock electronics.
Event Days
The BaseStation 3200 supports eight event days.
An event day will stop all watering, and will keep
all programs from starting on that date. An
event day can be scheduled up to a year in advance.
To set a new event day, use NEXT/PREV to highlight an empty event day box and then use the +
and – keys to set the desired date. Use the + and – keys to edit existing event days. An event
day may be cleared by pressing the CLR key when the day to be removed is highlighted.