Dell POWEREDGE M1000E - Manual (Page 312)

290 Fabric OS Message Reference
53-1002749-01
EM-1050
5
Recommended
Action
No action is required.
EM-1050
Message FRU <FRU Id> removal detected.
Message Type LOG
Severity INFO
Probable Cause Indicates that a field-replaceable unit (FRU) of the type and location specified by the FRU ID value was
removed from the chassis.
Recommended
Action
Verify that the FRU was intended to be removed. If not, replace the FRU as soon as possible.
EM-1051
Message <FRU Id>: Inconsistency detected, FRU reinitialized.
Message Type LOG
Severity INFO
Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the state
of the FRU was changing during a failover. The FRU is reinitialized and the traffic may have been
disrupted.
Recommended
Action
No action is required.
EM-1057
Message Blade:<Slot Id> is getting reset:<Fault reason>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the blade is being automatically reset because of known resetable transient errors such as
an application-specific integrated circuit (ASIC) parity error.
Recommended
Action
No action is required if the switch does not reach the reset threshold for the switch or blade. If the reset
threshold is reached on the switch or blade, the switch or blade will be faulted and should be replaced.