Ham-1009, Ham-1010, Ham-1011 – Dell POWEREDGE M1000E User Manual

Page 566

Advertising
background image

544

Fabric OS Message Reference

53-1002749-01

HAM-1009

5

HAM-1009

Message

Need to MANUALLY REBOOT the system for recovery - auto-reboot is disabled.

Message Type

FFDC | LOG

Severity

CRITICAL

Probable Cause

Indicates that the recovery by auto-restart is disabled, therefore the switch needs to be manually
restarted for recovery. This message is displayed if the event logged in HAM-1007 has occurred and
auto-reboot is disabled.

Recommended

Action

Execute the reboot command to restart the switch manually.

HAM-1010

Message

Maunually trigger haReboot/reboot for recovery from OOM when appropriate.

Message Type

LOG

Severity

CRITICAL

Probable Cause

Indicates that out of memory (OOM) condition has been detected when the switch was not ready for
warm recovery.

Recommended

Action

Manually trigger the switch restart for cold recovery, if needed; or wait until switch is ready for warm
recovery and execute the haReboot or haFailover command.

HAM-1011

Message

haReboot is automatically triggered for warm recovery from OOM.

Message Type

FFDC | LOG

Severity

CRITICAL

Probable Cause

Indicates that out of memory (OOM) condition has been detected when switch was ready for warm
recovery. The haReboot is automatically triggered.

Recommended

Action

No action is required. The haReboot is automatically triggered to recover from the OOM condition.

Advertising