Dell POWEREDGE M1000E - Manual (Page 504)

482 Fabric OS Message Reference
53-1002749-01
FW-1273
5
FW-1273
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of frame types or commands that the port receives has fallen below the low
boundary. The port has received a Small Computer System Interface (SCSI) Read, SCSI Write, SCSI
Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1274
Message
<Label>, is above high boundary(High=<Filter Counter>, Low=<Low value>). Current
value is <Value> <Unit>.
Message Type AUDIT | LOG
Class FW
Severity INFO
Probable Cause Indicates that the number of frame types or commands that the port receives has risen above the high
boundary. The port has received a Small Computer System Interface (SCSI) Read, SCSI Write, SCSI
Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1275
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of frame types or commands that the port receives has changed from a value
outside of the acceptable range to a value within the acceptable range. The port has received a Small
Computer System Interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP
commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.