Dell POWEREDGE M1000E - Manual (Page 480)

458 Fabric OS Message Reference
53-1002749-01
FW-1137
5
FW-1137
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP state
changes occur when the SFP is inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1138
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has fallen below the low
boundary. SFP state changes occur when the SFP is inserted or removed. A low number of SFP state
changes means that the switch is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1139
Message <Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has risen above the high
boundary. SFP state changes occur when the SFP is inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.