Dell POWEREDGE M1000E - Manual (Page 384)

362 Fabric OS Message Reference
53-1002749-01
FCR-1063
5
FCR-1063
Message Fabric <fabric ID> for switch with domain ID: <domain ID> mismatch with local
fabric ID <local fabric ID>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the fabric ID of the switch does not match the local switch.
Recommended
Action
Run the switchShow command to display the fabric ID. Change the fabric ID to match on both ends by
modifying either the local or remote host using the fcrConfigure command.
FCR-1064
Message Fabric ID of backbone FC-Routers mismatch or overlap.
Message Type LOG
Severity ERROR
Probable Cause Indicates that either a backbone fabric split and both are connected to a common edge fabric, or the
fabric ID of two backbone fabrics connected to an edge fabric are the same.
Recommended
Action
If the backbone fabric split, merge the fabrics.
If two (or more) backbone fabrics have the same IDs, make the fabric IDs unique using the fcrConfigure
command.
FCR-1065
Message
Fabric on port <port number> was assigned two different fabric IDs.
Message Type LOG
Severity ERROR
Probable Cause Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID
assignment.
Recommended
Action
Change the port fabric ID to the same value as the other ports connected to the edge fabric using the
portCfgExport or portCfgVexport commands.