Dell POWEREDGE M1000E - Manual (Page 421)

Fabric OS Message Reference 399
53-1002749-01
FICN-1077
5
FICN-1077
Message DevTapeEgr:Unloaded:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>:states=0x<4 prior emulation
states><previous emulation state><current emulation state>:cmds=0x<last 4
commands received from the channel for this device>:status=0x<last 4 status values
received from the channel for this device>:flags=0x<tape report bit flags
(0x80-Tape Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Rewind and Unload I/O has been processed from a remotely connected Logical Partition
(LPAR), which indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
FICN-1078
Message DevTapeEgr:WriteReport:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle
state to non-idle state transitions while this tape was loaded>:Cmds=0x<the number
of emulated host write commands processed while this tape was
loaded>:Chains=0x<the number of emulated host chains processed while this tape was
loaded>:MBytes=<the number of emulated write Kilobytes processed while this tape
was loaded>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Rewind and Unload I/O has been processed from a remotely connected Logical Partition
(LPAR) and Write Tape Pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.