Dell POWEREDGE M1000E - Manual (Page 705)

Fabric OS Message Reference 683
53-1002749-01
RTE-1001
5
RTE Messages
RTE-1001
Message Detected route inconsistency. It may cause connectivity issues. If such issues
arise, bounce all ISLs and ICLs on this chassis.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the constraints that are used to determine the paths for Dynamic Path Selection (DPS) are
not synchronized from active control processor (CP) to standby CP during the failover. This event causes
route inconsistencies.
Recommended
Action
Reset all E_ports on the chassis using the portDisable and portEnable commands.