Dell POWEREDGE M1000E - Manual (Page 731)

Fabric OS Message Reference 709
53-1002749-01
SEC-1087
5
SEC-1087
Message The security database is larger than the data distribution limit of fabric <fabric
data distribution limit> bytes.
Message Type LOG
Severity ERROR
Probable Cause Indicates the security database has more data than can be distributed to some of the switches in the
fabric.
Recommended
Action
Reduce the number of entries in the security policies to decrease the security database size.
SEC-1088
Message Cannot execute the command. Please try later.
Message Type LOG
Severity ERROR
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
SEC-1089
Message
Policy name <policy name> was not found.
Message Type LOG
Severity ERROR
Probable Cause Indicates the security policy name in the secPolicyAdd command does not exist.
Recommended
Action
Create the appropriate security policy first, and then use its name in the secPolicyAdd command to add
new members.