Dell POWEREDGE M1000E - Manual (Page 393)

Fabric OS Message Reference 371
53-1002749-01
FCR-1091
5
FCR-1091
Message Backbone Fabric ID changed to <Tag>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the backbone fabric ID has been changed.
Recommended
Action
No action is required.
FCR-1092
Message FCR ELS trap entries exhausted.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the FCR ELS trap entries are exhausted.
Recommended
Action
Execute the supportSave command and contact your switch service provider.
FCR-1093
Message
Slave EX-Port <Slave> interopmode conflicts with trunk master <Master>. Disabling
the port.
Message Type LOG
Severity INFO
Probable Cause Indicates that the slave EX_Port is disabled due to interop conflict with trunk master
Recommended
Action
Configure the slave EX_Port with the trunk master interop mode.