8 advance mode edp commands, Advance mode edp commands – Rice Lake 720i Programmable Indicator/Controller - Installation Manual User Manual
Page 103
Serial Commands
97
10.1.8
Advance Mode EDP Commands
See Table 10-16 for the EDP commands for the configuration of Advance Mode.
Table 10-16. Advance Mode EDP Commands
Command
Value
DAY.END
000000 - 235959
DAY.START
000000 - 235959
SHIFT.1.END
000000 - 235959
SHIFT.1.START
000000 - 235959
SHIFT.2.END
000000 - 235959
SHIFT.2.START
000000 - 235959
SHIFT.3.END
000000 - 235959
SHIFT.3.START
000000 - 235959
PROMPT.COMMENTS
ON/OFF
PROMPT.DELIVERY.NUM
ON/OFF
PROMPT.DELIVERY.WGT
ON/OFF
PROMPT.CUSTOMER
ON/OFF
PROMPT.MATERIAL
ON/OFF
PROMPT.REPRINT
ON/OFF
PROMPT.SOURCE
ON/OFF
PROMPT.VEHICLE
ON/OFF
PROMPT.PRINT
ON/PROMPT/OFF
SERIAL.NUMBER
0 - 9999999
Note
The 720i must see six digits of data for the time values in the first 8 parameters. If the 720i does not see at least
000000 it will respond with ??.