Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 11)

Introduction 5
1.4 System Configurations and Options
Table 1-2 lists the 720i system models and part
numbers. All models include CPU board with one
option card slot. The
720i is a single scale unit and
cannot be upgraded to a multi-channel A/D.
Table 1-2. Part Numbers for 720i Models
System Model Model PNs
Universal (tilt stand) model, 115/230 VAC
with PCE software 101230
Universal (tilt stand) model, 115/230 VAC,
European, CEE 7/7 power cord with PCE
software 103459
Panel mount model, 115/230 VAC (power
cord sold separately), with PCE software 101229
Universal (tilt stand) model, 115/230 VAC
with 720i Batch software 115447
Universal (tilt stand) model, 115/230 VAC,
European, CEE 7/7 power cord with 720i
Batch software 115448
Panel mount model, 115/230 VAC (power
cord sold separately), with 720i Batch
software 115449
Option Cards
Table 1-3 lists the available 720i option cards. Most of
the listed option cards are installed in the expansion
card slot, J12. USB, Ethernet, and fiber-optic interface
cards are installed in connector J11.
Table 1-3. Part Numbers for 720i Option Cards
Option Card PN
Single-channel analog output card 67602
Dual serial port expansion card 67604
24-channel digital I/O expansion card 67601
Ethernet communications card 71986
EtherNet/IP communications card 87803
DeviceNet interface card 68541
Allen-Bradley Remote I/O interface card 68539
Profibus DP interface card 68540
USB interface card 93245
Fiber-optic interface card 96736
Relay Options
Relay racks are available for all 720i systems. Relays
require an external enclosure for the relays. Consult
factory for details.
DC Power Supplies
Two DC power supplies are available for mobile 720i
applications:
PN 97474, 9–36 VDC supply
PN 99480, 10–60 VDC supply
Consult factory for more information.
1.5 Summary of Changes
Updates to this manual include the following:
Version 1.03
• MINNEG and MAXNEG parameters have
b e e n ad d e d t o t h e AL GO U T m e n u ( s e e
Section 3.2.6 on page 45) to support tracking
of negative weight values.
• Added Section 9.0 on page 81 on ProAction
PCEE information.
• Added print token for Alibi Numbering <AN>.
Version 1.04
• Updated the analog menu.
• Added Section 8.0 on page 65 on Setpoints
(Version 2.00)
• Batching ( 720i batching Version 1.00).
• Updated Alibi Tracking Section 11.12 on
page 110.
Version 2.00
• Added Advance Mode Section 7.6 on page 59.
• Updated FEATURE menu Figure 3-13 on
page 37 to include Advance Mode.
• Batching ( 720i batching Version 1.01).