2 default print formats – Rice Lake 720i Programmable Indicator/Controller - Installation Manual User Manual
Page 60
54
720i Installation Manual
6.2
Default Print Formats
Table 6-2 shows the default print formats for the
720i
and lists the conditions under which each print format is
used. The HDRFMT1 and HDRFMT2 formats are used to specify header information that can be used by the other
ticket formats. The contents of the HDRFMT
x
format can be inserted into any other ticket format using the <H1>
and <H2> formatting commands. Use
Revolution III
or serial commands to view and edit print formats (see
Table 6-2. Default Print Formats
Format
Default Format String
Used When
GFMT
GROSS<G><NL2><TD><NL>
Normal mode, no tare in system
NFMT
GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N><NL2>
<TD><NL>
Normal mode, tare in system
ACCFMT
ACCUM<A><NL><DA><TI><NL>
Accumulator enabled and displayed
*SPFMT
<SCV><SP><SPM><NL>
Setpoint print operation with PSHPRNT=ON
TRWIN
<NL>ID<SP><TID><NL2>GROSS<TR1>
<NL2><DA><SP><TI><NL>
Press the Weigh In softkey, enter truck ID
number, and press Enter.
TRWOUT
<NL6>ID<SP><TID><NL2>GROSS<TR1><NL>TARE<SP><T
R2><NL>NET<SP2><TR3><NL2><DA><SP><TI><NL>
Press the Weigh Out softkey, enter truck ID
number, and press Enter.
TRFMT
REG ID: <TID>: <TR2> SCALE<S> <TD><NL>
Truck register currently displayed
ALERT
<COMP><NL><COAR1><NL><COAR2><NL>
<CONM1><NL><COPH1><NL>
<CONM2><NL><COPH2><NL>
<COML><NL><ERR><NL>
—
HDRFMT1
HDRFMT2
COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST ZIP<NL2>
Must be inserted into other print format
AUXFMT.FMT#x
x=1-20
GROSS<G><NL2><TD><NL>
See Table 7-5, “Default Print Formats for Advanced Truck,” on
page 61
Formats AUX1FMT—AUX20FMT
Note
In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare
weight.
* 720i Batching Version only