Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 26)

20 720i Installation Manual
3.2 Menu Structures and Parameter Descriptions
The 720i indicator can be configured using a series of menus accessed through the indicator front panel when the
indicator is in setup mode. Table 3-1 summarizes the functions of each of the main menus.
Table 3-1. 720i Menu Summary
Menu Menu Function
SCALES Configuration Configure and calibrate scale
SERIAL Serial Configure communications ports
FEATURE Feature Set date and time formats, truck mode, passwords, keyboard locks, regulatory mode, and
initial consecutive number value, and define softkeys.
PFORMT Print Format Set port used for header, gross, net, truck in/out, and auxiliary print ticket formats. See
Section 6.0 on page 52 for more information.
SETPTS Setpoints Configure setpoints and batching mode. Only available in the 720i Batching version.
DIG I/O Digital I/O Assign digital input/output functions
ALGOUT Analog Output Configure analog output module. Used only if analog output option is installed.
VERSION Version Display installed software version number. The RSConfig softkey on the Version menu can
be used to restore all configuration parameters to their default values.
The following sections provide graphic representations of the 720i menu structures and tables describing the menu
parameters. Default values are shown in bold type; numeric ranges and string values are shown in italic type.
Parameters shown surrounded by a dotted-line box only appear under the special circumstances explained under
each box.
SCALES SERIAL FEATURE PFORMT DIG I/O ALGOUT VERS
720i Batching
Version only
see page 57
SETPTS
Figure 3-4. Configuration Menu Flow
Move LEFT / Previous
Move RIGHT / Next
ENTER value
Move UP
Move DOWN
Access MENU
Figure 3-5. Front Panel Key Functions in Setup Mode
Four front panel keys are used as directional keys to navigate through the menus in setup mode (see Figure 3-5).
The
UNITS and TARE keys scroll left and right (horizontally) on the same menu level; ZERO and GROSS/NET move
up and down (vertically) to different menu levels. The PRINT key serves as an Enter key for selecting parameter
values within the menus. Press the MENU key to show the system menu. A label on each of these keys identifies the
direction provided by the key when navigating through the setup menus.