Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 27)

1 st Level
Parameter
Default value Value
When moving through values below the first menu level, press to return to the
level above. Press or to move to the next parameter on the level above.
1 st Level
Parameter
2 nd Level
Parameter
2 nd Level
Parameter
Value Value
Configuration 21
Figure 3-6. Setup Mode Menu Navigation
To select a parameter, press or to scroll left or right until the desired menu group appears on the display, then
press to move down to the submenu or parameter you want. When moving through the menu parameters, the
default or previously selected value appears first on the display.