Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 37)

Configuration 31
SCALES Menu, FORMAT Submenu, SPLIT

OFF
Parameter Choices Description
Level 4, FORMAT submenu
DECPT1 8888888
8888880
8888800
8.888888
88.88888
888.8888
8888.888
88888.88
888888.8 Decimal point location for first range or interval. Specifies the location of the decimal point or
dummy zeroes in the primary unit display. Value should be consistent with local legal
requirements.
DDIV1 1D
2D
5D Display divisions for first range or interval. Selects the minimum division size for the primary
units displayed weight.
MAX1 2000
weight Maximum weight for first range or interval.
DECPT2 888888.8
8888888
8888880
8888800
8.888888
88.88888
888.8888
8888.888
88888.88 Decimal point location for second range or interval. Specifies the location of the decimal
point or dummy zeroes in the primary unit display. Value should be consistent with local legal
requirements.
DDIV2 2D
5D
1D Display divisions for second range or interval. Selects the minimum division size for the
primary units displayed weight.
MAX2 5000
weight Maximum weight for second range or interval.
DECPT3 888888.8
8888888
8888880
8888800
8.888888
88.88888
888.8888
8888.888
88888.88 Decimal point location for third range or interval (SPLIT = 3RNG or 3INTVL only). Specifies
the location of the decimal point or dummy zeroes in the primary unit display. Value should
be consistent with local legal requirements.
DDIV3 2D
5D
1D Display divisions for third range or interval (SPLIT = 3RNG or 3INTVL only). Selects the
minimum division size for the primary units displayed weight.
MAX3 10000
weight Maximum weight for third range or interval (SPLIT = 3RNG or 3INTVL only).
Table 3-4. SCALES Menu, FORMAT Submenu Parameters, SPLIT

OFF