Add finishing touches to your song, Cdr recmode fcd-r recording mode, Shift – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 106: Edit (fader), Parameter, Time/value dial, And press, Press
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Add Finishing Touches to Your Song
CDR RecMode fCD-R recording mode^
If
this
is
turned
"on,"
the
performance
data
recorded
in
the
mastering
tracks
will
be
set
to
a recording
mode
of "CDR"
regardless of the
recording mode
of the current song (p. 22). In this case, you can omit the step of creating an
image file when writing the song to a CD-R disc.
Off:
The mastering tracks are recorded using the recording mode of the
present song.
On:
The mastering tracks are recorded in CDR mode. This allows you to
skip the step of creating an image file when writing to the CD, so it
can shorten the write time.
n 10,11,14 9
€
13,15
Insert the effect (FXl) into the master out. Hold down
[SHIFT]
and press
[EDIT (FADER)].
Performance data that was
recorded to the mastering
tracks with a
CDR RecMode
(CDR
recording mode) setting of
"On" can be playback only
in the mastering room. (It
cannot be playback in Play
condition.)
Press
PARAMETER
[◄◄][►►] several times until "FXl Ins
Sw =" appears in the display.
Rotate the
TIME/VALUE dial
to select "On."
106