Initializing the disk (drive initialize), Making a multi-track recording, Play (display) – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 69: System, Yes (enter), Time/value dial
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Initializing the Disk (Drive Initialize)
when the hard disk is initialized, the entire contents of the disk will be
erased. Make sure that the hard disk does not contain data you need to keep.
If necessary, back up the data to the Roland CD recorder, etc.
1
4
3
-- SU8V-
I TOWt n
d|d|6|d|d|6|6|ft
S S S E B B H
Press
[PLAY (DISPLAY)].
Press
[SYSTEM]
several times until "SYS Drivelnitialize"
appears in the display.
Press
[YES (ENTER)].
"Init.Drive=" appears in the display.
If you accidentally delete
data that you need, that
data cannot be restored to
its previous condition.
Roland Corporation
assumes no liability
concerning such loss of
data.
When a single hard disk or
other disk is divided into
partitions,
it is no possible
to initialize only an
individual partition.
The
Drive Initialize operation
will be performed on all
partitions of that disk drive
or other disk.
Rotate the
TIME/VALUE dial
to select the disk drive that you
wish to initialize (IDE, SCSI0-SCSI7).
COWmCDN MARKER#
SVb I n i i. Dr i ve= IDE: 0
IbEASlfftE №AT
AO