Protecting songs (song protect), Making a multi-track recording, I— about effective use – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 66: Song protect
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Multi-Track Recording
Protecting Songs (Song Protect)
The possibility that a performance saved to the disk may still be mistakenly
overwritten (recorded over), or that the song itself may be accidentally
deleted has been considered. You can protect songs from being rewritten in
situations such as these. The function is called
Song Protect.
-i—
About Effective Use
Song Protect performs the same function as the protect tab or switch on
floppy disks and magnet-optical disks. Thus, even if Song Protect is turned
on, you can stiU store locate points and mark points, and carry out
operatiorK such as changing Scenes.
However,
when
you
try
to
save
the
w'ork
you
have
done,
"Song
Protected"
appears
in
the
display,
and
you
are
prevented
from
continuing
any
further
with
the
save.
However,
when
you
remove
Song
Protect,
any
settings
made
when Song Protect was on are lost.
After you have finished all work for the day, tixm on Song Protect
iiiunediately before shutting off the power to the VS-890. Furthermore, right
after turning on the power to the VS-890 at the beginning the day's
operations, you should immediately turn off Song Protect.
To Apply Song protect
4 3
.
'
hi%