Playing back the mastering tracks, Add finishing touches to your song – Roland 24 bit Digital Studio Workstation VS-890 User Manual
Page 110
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Add Finishing Touches to Your Song
Playing back the mastering tracks
Here's how you can verify the audio that was mixed down to the mastering
tracks. Tracks 1-6 will not be playback.
1,6 4
•11
1
2
Press
[PLAY (DISPLAY)].
Press
[CD-RW (MASTERING)]
several times until "CDR
MASTERING ?" appears in the display.
Press
[YES (ENTER)].
"CDR Mastering Sw =" appears in the
display.
Rotate the
TIME/VALUE dial
to select "On." The CD-RW
indicator blinks, indicating that the Mastering Room is on.
Press the
[STATUS]
([7]-[8]). The STATUS indicators will light
green
(MasStatus (mastering track status)=
"Play").
Press
[PLAY (DISPLAY)].
When you turn CDR
RecMode (CDR recording
mode) "on," the mastering
tracks can be playback only
using the following
procedure. They cannot be
playback in Play condition.
1 10