Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 119)

Creating an Original Audio CD (CD-R Write)
This chapter explains how you can create an original audio CD by recording
two tracks (stereo tracks) from the VS-890 to the Roland CD recorder.
Connecting the CD-RW Drive
A CD-R/CD-RW drive allows you to use CD-R or CD-RW discs to create
audio CDs. CD-R discs are the preferred format for audio CDs.
1
2
Make sure that the power of all devices are turned off.
Use a SCSI cable to connect the Roland CD recorder.
Turn on the power of the Roland CD recorder.
CEt-RW (Appendices p. 12)
SCSI (Appendices p. 13)
In order to create an
original audio CD, you will
need the Roland CD
recorder (sold separately).
Turn on the power of the VS-890.
Creating an Audio CD (CD-R Write)
When this procedure is performed, the VS-890 will first create a CD-R image
file on its internal hard disk, and will then write that image file to the CD-R
disc. For this reason, there must be sufficient free space on the internal hard
disk to create this image file.
All imused capacity of the hard disk will be allocated to the image file,
regardless of the partition settings. The image file will be deleted
automatically after it has been written to the CD-R disc.
i®>
Because image data is not
created in situations
involving specified tracks
of a song when the
recording mode is CDR
mode, or V tracks recorded
on a mastering track m
CDR mode, the time it
takes to write to the CD-R
disc can be reduced
1 lO