Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 125)

Creating an Originai Audio CD (CD-R Write)
The VS-890 displays the SCSI ID number of the connected CD
recorder for a set time, and the CD-R disc information is then
displayed.
Only the following buttons, knobs, and faders effect the
sound. Try listening to the contents of the disc.
[ZERO]:
Move to the beginning of the first song.
[ (REW)]
:Rewind as long as you continue to press the button.
[ ►► (FF)]:
Fast-forward as long as you continue to press the button.
[STOP]:
Stop.
[PLAY]:
Begin playback from the current location.
[PREVIOUS (MARKER)]
:Retum to the previous song.
[NEXT (MARKER)]:
Advance to the next song.
Master fader: Adjust the overall volume.
PHONES knob; Adjust the volume of the headphones.
*1^
When listening to discs that have not been
finalized, the last approximately 0.5
seconds of the song cannot be playback
Finalizing makes this portion audible.
Listening possible
Listening not possible
(approx. 0.5 sec.)
Before Finalizing
▼
Listening possible
After Finalizing
Use the master fader and phones knob to adjust the volume to
a comfortable level.
When you are finished playing back, press [STOP].
Press [NO (CANCEL)]. This returns you to the status at Step 2.
Pressing [CD-RW (MASTERING)] also returns you to Step 2.
Buttons cind knob response
may be slow, but this does
not indicate any
malfunction. For example,
expect to wait about five
seconds after pressing
[PLAY] or [ ] before
you hear sound.
[ (REW)],
[ ►► (FF)3 buttons
active when be stopping.
y^
Transport control buttons
are used in controlling the
CD control. They are not
controls for the VS-890’s
songs. Furthermore, the
content of the CD currently
listened to cannot be
recorded by the VS-890.
Finalize (Appendices;
"Glossary" p. 12)
1 ne