Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 12)

Preparations
Adfusting the Display Contrast
The text in the VS-890's display may be difficult to read immediately after
the unit is turned on or after it has been used for long periods, or depending
on the environment in which the unit is used. If this occurs, adjusting the
display contrast.
1
Press [SYSTEM] several times until "SYS System PRM ?'‘
appears in the display.
Press [YES (ENTER)].
^ Press [ ◄◄ ][ ►► ] several times imtil "SYS LCD Contrast="
appears in the display.
^ Rotate the TIME/VALUE dial.
If You Do Not Understand the Display or
Don't Know What to Do
If an unfamiliar display appears or if you do not know how you arrived at
the current condition, press
[PLAY (DISPLAY)].
This will return you to the
initial power-on screen, allowing you to re-do the procedure from the
begirming.
L EorrcowamoN _____________________________ I I P1.AY I
QSONQ QLOCArDR QTRAGK (tSTECT QSVSTEM iSomw]
a a
•Conr l«J>ya 0 il/O
If you attempt to perform an incorrect operation or if the specified
operation cannot be executed, an error message will appear in the
display. Please refer to "Error Messages" (Appendices p. 9) and take the
appropriate action.
If the results are not as described in the User Guide or Owner's Manual
even though you have followed the specified steps, please refer to
"Troubleshooting" (Appendices p. 5).
If the information in "Troubleshooting" does not resolve the problem,
contact a nearby Roland Service Center or authorized Roland
Distributor.
You can adjust tlie display
contrast to hold down
[PLAY (DISPLAY)]
and
rotate
TIMEAf ALUE dial.
12